• Functional Conductive Nanocoating
  • Multi-Performance CNT Paste
  • Highly Customizable
  • AQAMORPH; Water borne MWCNT based functional coating with high electrical conductivity


    AQAMORPH HQ2000S Inquire

    Datasheet

    Aqamorp HQ2000S has good electrical conductivity with very good coating properties. Cost effective. Excellent adhesion to many substrates without heat. Scrub resistant. Low curing temperature

    Benefits:

    • One-coat or primer/topcoat system, thixotropic / pseudo plastic fluid
    • Good electrical conductivity to low and high voltage applications
    • Good moisture/grease resistance
    • Excellent flexibility
    • Recommended curing temperature +95C but cures also in room temperature
    • Cost Effective
    • Sheet resistivity 8Ohm/square (8um thick)

    Applications:

    • EMI / RFI shielding
    • Highly conductive surface for flexible substrate
    • Printed wires to different substrates
    • Low (12/24V) and main(110/230V) voltage heating elements

    AQAMORPH HQ3000S Inquire

    Datasheet

    Aqamorp HQ3000S has good electrical conductivity with excellent coating properties. Excellent adhesion to many substrates after heat treatment. Very good scrub resistance. Low curing temperature

    Benefits:

    • One-coat or primer/topcoat system, thixotropic / pseudo plastic fluid
    • Good electrical conductivity to low and high voltage applications
    • Good moisture/grease resistance
    • Excellent flexibility
    • Recommended curing temperature +95C but cures also in room temperature
    • Sheet resistivity 4.5Ohm/square (13um thick)

    Applications:

    • EMI / RFI shielding
    • Highly conductive surface for flexible substrate
    • Printed wires to different substrates
    • Low (12/24V) and main(110/230V) voltage heating elements

    AQAMORPH HQ4000S Inquire

    Datasheet

    Aqamorp HQ4000S has good electrical conductivity with excellent coating properties. Excellent adhesion to many substrates after heat treatment. Very good scrub resistance. Low curing temperature

    Benefits:

    • One-coat or primer/topcoat system, thixotropic / pseudo plastic fluid
    • Excellent electrical conductivity
    • Excellent moisture/grease resistance
    • Excellent flexibility
    • Recommended curing temperature +95C but cures also in room temperature
    • Sheet resistivity 0.8Ohm/square (50um thick)

    Applications:

    • EMI / RFI shielding
    • Highly conductive surface for flexible substrate
    • EM noise absorbing
    • Printed wires to different substrates
    • Ultra-low (1.5V - 10V) voltage heating elements

    More information from request

  • AQAMORPH; Water borne MWCNT based functional coating with high solid content


    AQAMORPH Q5000L Inquire

    Datasheet

    Aqamorph Q5000L coating is cost effective coating which coating which has good electrical conductivity with excellent coating properties. Good adhesion to many synthetic and natural substrates.

    Benefits:

    • One-coat or primer/topcoat system, thixotropic / pseudo plastic fluid
    • Good electrical conductivity to low and high voltage applications
    • Good moisture/grease resistance
    • Excellent flexibility
    • Recommended curing temperature +150C. In right conditions coating cures also in room temperature.
    • Very Cost Effective
    • Sheet resistivity 9Ohm/square (20um thick)

    Applications:

    • EMI / RFI shielding
    • Highly conductive surface for flexible and rigid substrates
    • Main (110/230V) voltage heating elements

    AQAMORPH Q5000S Inquire

    Datasheet

    Aqamorph Q5000S coating is a cost effective coating which has good electrical conductivity with very good coating properties. Good adhesion to many synthetic and natural substrates. Curing temperature is much lower than Aqamorph Q5000L

    Benefits:

    • One-coat or primer/topcoat system, thixotropic / pseudo plastic fluid
    • Good electrical conductivity to low and high voltage applications
    • Good moisture/grease resistance
    • Excellent flexibility
    • Recommended curing temperature +95C. In right conditions coating cures also in room temperature.
    • Cost Effective
    • Sheet resistivity 8Ohm/square (20um thick)

    Applications:

    • EMI / RFI shielding
    • Highly conductive surface for flexible and rigid substrates
    • Main (110/230V) voltage heating elements

    More information from request.

  • AQATEX; Multi-purpose CNT coated synthetic textile


    AQATEX 75 Inquire

    Aqatex 75 is very light synthetic textile with CNT based functional coating. Very simple to laminate other structures and materials. Possible to cast inside of epoxy and get new special properties in very thin form.

    Benefits:

    • Very light
    • Low sheet resistivity 7Ohm/square (5um thick)
    • Excellent flexibility
    • Cost Effective
    • Lot of design freedoms

    Applications:

    • Stealth / EMI / RFI shielding
    • Heating elements for low (12V or under) and main voltages (230V with current limiter)