• Functional Conductive Nanocoating
  • Multi-Performance CNT Paste
  • Highly Customizable

MORPHOPOX; Durable water borne epoxy paint with electrical conductivity


MORPHOPOX-245D Inquire

Morphopox-245D is a two component dispersion epoxy coating designed for applications where a stealth property is needed. Morphopox-245D based to water borne dispersion epoxy resin system and superior electrical conductivity of carbon nanotubes. Product does not contain any metallic particles.

Benefits:

  • Water-borne and environmental friendly
  • Low VOC
  • 2-component epoxy paint for metal and plastic substrates
  • Durable with good chemical resistance
  • Cost Effective

Applications:

  • Stealth / EMI / RFI shielding

Two component dispersion epoxy resin coating designed for applications where a good electrical conductivity and high chemical resistance is needed. It can be used as durable base-coat. Epoxy is considered the industry standard for high-end coating. No flammability and can be applied as thick or thin as you need it.

It's recommend to squeegee this product out and apply 2.7m2 per liter (approx. 200um) and back roll it with a shed-resistant roller to even it out. It has a good pot life (60 minutes) once it's mixed with the converter. Once you get the product out of your mixing bucket it takes much longer for it to tack off.

Curing Schedule:

Pot Life
60 minutes @ +23C
Tack Free time
4 - 6 hours @ +23C
Re-coating
6 - 10 hours @ +23C
Light Load
10 - 14 hours @ +23C
Full Cure
3 - 6 days @ +23C

 
APPLICATION TEMPERATURE:
15-35 ºC with relative humidity below 85%

SOLIDS BY WEIGHT:
SOLIDS BY VOLUME:
VOLATILE ORGANIC CONTENT: Nearly zero per liter
COLORS: Black
RECOMMENDED FILM THICKNESS: 200-700μm
COVERAGE PER LITER: 2.7m2 @ 200μm
PRODUCT STORAGE: Store product at normal room temperature. Continuous storage should be between 15ºC and 35ºC. Avoid feezing!
PRIMING: A suitable primer should be used before applying this product. See the front side of this technical data for primer information.
PRODUCT APPLICATION: The mixed material can be applied by brush, roller or airless spray. However, the material can also be applied by a suitable serrated squeegee and then back rolled as long as the appropriate thickness recommendations are maintained. Maintain temperatures and relative humidity within the recommended ranges during the application and curing process.
RE-COAT OR TOP-COATING: If you opt to re-coat or topcoat this product, you must first be sure that the coating has tacked off before re-coating. However, all previous coats should be deglossed to insure a trouble free bond prior to application of re-coats or topcoats. Colder temperatures will require more cure time for the product before re-coating or top-coating can commence. Before re-coating or top-coating, check for epoxy blushes (a whitish, greasy film or deglossing). If a blush is present, it can be removed by any standard detergent cleaner prior to top-coating or re-coating. Many epoxy coatings and urethane's as well as multiple coats of this product are compatible for use as a topcoat.
CLEANUP: Use ethanol and/or water